Calibrate and Play

Once you are in the waiting room, press A on the right controller to enter passthrough mode on the Pico headset.

*Playing in passthrough mode is highly recommended for the players’ safety.

After entering passthrough mode, execute the 3-step calibration process.

Step 1

• Go into a T-pose (make sure feet are placed together)

• On your left controller, press and hold Y, followed by the trigger to calibrate (refer to ‘getting started’ video for example).

• Calibration is activated when the AXIS nodes vibrate.

Step 2

Remain in T-pose (make sure feet are placed together)

• Press and hold B on your right controller, followed by the trigger to calibrate.

• Calibration is activated when the AXIS nodes vibrate.
• Ensure that AXIS nodes are paired and tracking movement.

Step 3

• Ensure that both players are standing at the same position on their respective mats.

• Press the “Home” button on either controller to center the players.

Start the Match

• Press ‘Start Match’ on the PC once both players are ready.